CPC092492
117.DOC
                 The Complete Answering Machine
               *** Reset and Discard Hang Up Patch
                                

This document is provided as "For your information" and as is.
Neither The Complete PC nor any of it's employees assume any
responsibility for consequences resulting from the use of the
following information nor can the Complete PC technical support
provide help with this document.  The user of said information
does so at his or her own risk.

This document discusses the *** Reset patch available for The
Complete Answering Machine.  This patch will reset your system to
answer in the default mailbox if a caller has accessed another
mailbox and then hung up or if you picked up a call using ***
once your caller accessed a mailbox other than the default.  This
software will also discard all messages of recorded dial tone
shorter than seconds long.

The file itself can be found on our Technical Support BBS at 408-
434-9703.  The filename for this patch is SEVEN.EXE.  Copy these
files to your Disk 1 of your CAM software.

If you have CAM installed on drive C in a subdirectory called
CAM:

Copy the file ANSWER2.EXE into your CAM subdirectory.

           Ex. A> COPY ANSWER2.EXE C:\CAM\ANSWER2.EXE

Re-boot your system.

If you have CAM installed on a drive other than C or in a
subdirectory other than CAM, install as follows:

If you have greetings or messages already recorded that you would
like to keep, archive them BEFORE proceeding.

If you have a series of mailboxes set up that you would like to
save, copy the file MAILBOX.CAM into another subdirectory on your
system.

Perform a First Time installation, following the instructions in
your CAM manual, sure to use the new version of Disk 1 for the
installation.

Copy MAILBOX.CAM back into your CAM subdirectory.

Re-boot your computer.

Restore your archived messages and/or greetings.